Set [TV] / [VIDEO] at the top of the remote commander to [TV].

To

Press

 

 

Adjust the volume of the TV

2 +/–

 

 

Switch to TV (Teletext off)*

a (TV)

 

 

Switch to Teletext*

/ (Teletext)

 

 

Select the sound

AUDIO MONITOR

 

 

Use FASTEXT*

FASTEXT buttons

 

 

Call up the on-screen display

DISPLAY

 

 

Change the Teletext page*

c/C

 

 

Switch to/from wide mode of a Sony wide TV (For

WIDE

other manufactures’ wide TVs, see “Controlling other

 

TVs with the remote commander (not available on SLV-

 

SE350K and SE600N)” below.)

 

 

 

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery together with an old one.

•Do not use different types of batteries together.

•Some buttons may not work with certain Sony TVs.

* not available on SLV-SE350K and SE600N

Controlling other TVs with the remote commander (not available on SLV-SE350K and SE600N)

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number.

1

2 Hold down ?/1, and enter your TV’s code number using the programme number buttons. Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1, t TV/VIDEO, programme number buttons, –/– – (ten’s digit), PROG +/–,

2+/–, a (TV), /(Teletext), FASTEXT buttons, WIDE*, MENU*, M/m/</ ,*, and OK*.

Started Getting

* These buttons may not work with all TVs.

continued

Setting up the remote commander 7