To use the shuttle ring in jog mode

Use this mode for frame-by-frame playback.

Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the picture one frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the speed you turn the shuttle ring.

To resume normal mode, press JOG again. The JOG button turns off.

Tip

•Adjust the picture using the TRACKING +/– buttons if:

–Streaks appear while playing in slow motion.

–Bands appear at the top or bottom while pausing.

–The picture shakes while pausing.

To set tracking to the centre position, press both buttons (+/–) at the same time.

Notes

•The sound is muted during these operations.

•In the LP mode, noise may appear or there may be no colour.

•If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.

•The picture may show noise when playing at high speed in reverse.*

* SLV-SE350K only

Operations Additional

Playing/searching at various speeds 63