Additional connections

To a stereo system (not available on SLV-SE600A/E and SX600E)

You can improve sound quality by connecting a stereo system to the AUDIO OUT R/L jacks as shown on the right.

AUDIO OUT

LINE IN

R/L

 

Audio cable (not supplied) : Signal flow

To a satellite or digital tuner with Line Through

(not available on SLV-SE600A)

Using the Line Through function, you can watch programmes from a satellite or digital tuner connected to this VCR on the TV even when the VCR is turned off. When you turn on the satellite or digital tuner, this VCR automatically sends the signal from the satellite or digital tuner to the TV without turning itself on.

DECODER/ LINE OUT

t LINE-3 IN*1 or DECODER/t

LINE-2 IN*2

Scart cable (not supplied) : Signal flow

1 Connect the satellite or digital tuner to the DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector as shown above.

2 Set DECODER/LINE3*1 (or DECODER/LINE2*2) to LINE3*1 (or LINE2*2) in the OPTIONS-2 menu.

3 Set POWER SAVE to OFF in the OPTIONS-2 menu.

4 Turn off the VCR.

To watch a programme, turn on the satellite or digital tuner and the TV.

Note

•You cannot watch programmes on the TV while recording unless you are recording a satellite or digital programme.

*1 SLV-SE800D1/D2/E and SX800D only

*2 SLV-SE600E, SX600E, SE650D, SE700D1/D2/E1/E2, and SX700D/E only

12Connecting the VCR