Additional Information

Troubleshooting

If you have any questions or problems not covered below, please consult your nearest Sony service facility.

 

Symptom

Remedy

 

 

 

 

The ?/1ON/STANDBY

• Connect the mains lead to the mains securely.

 

switch does not function.

 

 

 

 

Power

The power is turned on but

• Moisture condensation has occurred. Turn the power off, unplug

the VCR does not operate.

the mains lead and leave the VCR to dry for over three hours.

 

 

 

 

 

The VCR is plugged in but

• Set POWER SAVE in the OPTIONS-2 menu to OFF (see page

 

the display window remains

79).

 

dark.

 

 

 

 

Clock

The clock has stopped and

• The clock stops if the VCR is disconnected from the mains for

“–:– –” appears in the

more than one hour. Reset the clock (and timer).

display window.

 

 

 

 

 

The playback picture does

• Make sure the TV is set to the video channel. If you are using a

 

not appear on the TV

monitor, set it to video input.

 

screen.

• If the VCR is connected to the TV with the Scart cable, make sure

 

 

the VIDEO indicator is lit in the display window. Use the t TV/

 

 

VIDEO button on the remote commander to light up the VIDEO

 

 

indicator.

 

 

 

 

The picture is not clear.

• If your TV is connected to the VCR with both Scart and aerial

 

 

cables, make sure the RF channel is set to OFF (see page 15).

 

 

• Existing broadcasts may interfere with the VCR. Reset the RF

 

 

channel output of your VCR.

Playback

 

• Adjust the tracking with the TRACKING +/– buttons.

 

• The video heads are dirty (see the last page of Troubleshooting).

 

 

 

 

Clean the video heads using the Sony T-25CLD, E-25CLDR, or T-

 

 

25CLW video head cleaning cassette. If these cleaning cassettes

 

 

are not available in your area, have the heads cleaned at your

 

 

nearest Sony service facility (a standard service charge will be

 

 

required). Do not use a commercially available liquid type

 

 

cleaning cassette other than Sony’s, as it may damage the video

 

 

heads.

 

 

• The video heads may have to be replaced. Consult your local Sony

 

 

service facility for more information.

 

 

 

 

The picture rolls vertically

• Adjust the vertical hold control on the TV or monitor.

 

during picture search.

 

 

 

 

 

The picture has no sound.

• The tape is defective.

 

 

• If you made A/V connections, check the audio cable connection.

 

 

 

 

The sound is unstable or has

• When you play a tape with the same sound recorded on both the

 

an echo.

hi-fi and normal audio tracks, make sure AUDIO MIX in the

 

 

OPTIONS-1 menu is set to OFF.

 

 

 

Information Additional

continued

Troubleshooting 85