Symptom

Remedy

 

 

 

 

Playback

The sound from a tape

Adjust the tracking.

recorded with the VCR is

The video heads are dirty. Clean the video heads using the Sony

 

not in stereo or the STEREO

 

T-25CLD, E-25CLDR, or T-25CLW video head cleaning cassette

 

indicator in the display

 

as explained above.

 

window is flashing.

 

 

 

 

 

 

 

No TV programme appears

Make sure the TV is set to the video channel. If you are using a

 

on the TV screen.

 

monitor, set it to video input.

 

 

• If your TV is connected to the VCR with both Scart and aerial

 

 

 

cables, make sure the RF channel is set to OFF (see page 15).

 

 

• Existing broadcasts may interfere with the VCR. Reset the RF

 

 

 

channel output of your VCR.

 

 

• Select the correct source with the INPUT SELECT button. Select

Recording

 

 

a programme position when recording TV programmes; select a

 

 

line input when recording from other equipment.

 

 

 

 

 

 

 

TV reception is poor.

• Make sure the aerial cable is connected securely.

 

 

• Adjust the TV aerial.

 

 

 

 

 

The tape starts playing as

The safety tab has been removed. To record on this tape, cover the

 

soon as it is inserted.

 

tab hole (see page 46).

 

 

 

 

 

The tape is ejected when

The safety tab has been removed. To record on this tape, cover the

 

you press zREC.

 

tab hole (see page 46).

 

 

 

 

Nothing happens when you

• Make sure the tape is not at its end.

 

press zREC.

 

 

 

 

 

 

The timer does not operate.

• Check that the clock is set.

 

 

• Make sure a tape has been inserted.

 

 

• Check that the safety tab has not been removed.

 

 

• Make sure the tape is not at its end.

 

 

• Make sure a programme has been set for timer recording.

 

 

• Make sure your timer settings are past the current time.

 

 

• Check that the decoder is turned on.

recording

 

• Check that the satellite tuner is turned on.

 

• The clock stops if the VCR is disconnected from the mains for

 

 

 

 

 

more than one hour. Reset the clock and timer.

 

 

• Turn the power off and unplug the mains lead.

Timer

 

 

 

The SHOWVIEW menu or

• Check that TIMER OPTIONS in the OPTIONS-2 menu is set

 

 

the TIMER menu does not

 

correctly (see page 79).

 

appear.

 

 

 

 

 

 

The VPS/PDC function

• Check that the clock and the date are set correctly.

 

does not operate properly.

• Check that the VPS/PDC time you set is the correct one (there

 

 

 

might be a mistake in the TV programme guide). If the broadcast

 

 

 

you wanted to record did not send the good VPS/PDC information,

 

 

 

the VCR will not start recording.

 

 

• If the reception is poor, the VPS/PDC signal might be altered and

 

 

 

the VCR might not start recording.

 

 

 

 

86Troubleshooting