Synchronized Recording

(not available on SLV-SE610A/E)

You can set the VCR to automatically record programmes from equipment such as a satellite tuner by connecting the equipment to the DECODER/ LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector. The connected equipment must have a timer function for this feature to work.

When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2).

How to connect for Synchronized Recording

Connect the DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector of the VCR to the TV Scart connector of the satellite tuner. Then connect the LINE-1 (TV) connector to the TV.

Scart cable (not supplied)

 

Satellite tuner, etc.

DECODER/t LINE-3 IN*1 or

TV Scart

DECODER/t LINE-2 IN*2

connector

 

i LINE-1 (TV)

Scart cable (not supplied) Scart (EURO-AV)

: Signal flow

Recording programmes using the Synchronized Recording function

SYNCHRO REC

Before you start...

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•Set DECODER/LINE3*1 (or DECODER/ LINE2*2) to LINE3*1 (or LINE2*2) in the OPTIONS-2 menu (see page 82).

•Refer to “Index to parts and controls” for button locations.

64Synchronized Recording (not available on SLV-SE610A/E)