Quick Start Guide

1Connecting the VCR

1

AERIAL IN

BIf your TV has a Scart (EURO-AV) connector

1.... Press I/1(on/standby) to turn on the VCR.

2 ...Press RF CHANNEL on the VCR lightly.

3 ...Press PROGRAM +/– to set the RF channel to OFF.

4 ...Press RF CHANNEL.

4

AERIAL OUT

3Using the Auto Set Up function

AUTO SET UP

3

2

l: Signal flow yLINE-1 (TV)

1 ... Connect the aerial to AERIAL IN of the VCR.

2 ... Connect AERIAL OUT the aerial input of your TV using the supplied aerial cable.

3 ... For better picture and sound, connect LINE-1 (TV) to your TV using a Scart cable if your TV has a Scart (EURO-AV) connector.

4 ... Connect the mains lead to the mains.

2Tuning your TV to the VCR

I/1 RF CHANNEL

PROGRAM +/–

AIf your TV does not have a Scart (EURO-AV) connector

1....Press I/1(on/standby) to turn on the VCR.

2 ... Press RF CHANNEL on the VCR lightly.

3 ... Turn on your TV and select a programme position for the VCR picture.

4 ... Tune the TV to the same channel shown in the VCR display window so that SONY VIDEO CASSETTE RECORDER appears clearly on the TV screen. Refer to your TV’s instruction manual for tuning instructions.

5 ... Press RF CHANNEL.

PROGRAM +/–

You can set the language for the on-screen display and channels.

1....Hold down AUTO SET UP on the VCR for more

than three seconds.

2 ...Press PROGRAM +/– to select the abbreviation of your country from the “Country abbreviation table.”

3 ...Press AUTO SET UP lightly.

When all the receivable channels are preset, “SET UP” disappears from the display window. You can rearrange the programme position to your favourite order (see “Changing/disabling programme positions”).

Now you can operate your VCR.

Sony Corporation