Specifications

System

Channel coverage PAL (B/G) VHF E2 to E12

VHF Italian channel A to H UHF E21 to E69

CATV S01 to S05, S1 to S20 HYPER S21 to S41

RF output signal

UHF channels 21 to 69 Aerial out

75-ohm asymmetrical aerial socket Tape speed

SP:PAL23.39 mm/s (recording/playback)

NTSC33.35 mm/s (playback only)

LP:PAL11.70 mm/s (recording/playback)

NTSC16.67 mm/s (playback only) EP:NTSC11.12 mm/s (playback only)

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Fast-forward and rewind time

Approx. 1 min. (with E180 tape)

Inputs and outputs

iLINE-1 (TV)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3 DECODER/tLINE-2 IN (SLV-SE610E, SE710D/E, SX710D/E, SX717D/E)

21-pin

Video input: pin 20

Audio input: pins 2 and 6 DECODER/tLINE-3 IN (SLV-SE810D/E, SX810D)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLINE-2 IN L o R (SLV-SE810D/E, SX810D)

VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms

Input impedance: more than 47 kilohms

R/D L/G (SLV-SE710D/E, SX710D/E, SX717D/E, SE810D/E, SX810D)

Phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

20 W

1.2W (POWER SAVE is set to FULL/ ON, minimum)

Operating temperature 5° C to 40° C

Storage temperature

–20°C to 60° C

Dimensions including projecting parts and controls

Approx. 430 × 98 × 283 mm (w/h/d) (SLV- SE610A/E, SE710D/E, SX710D/E, SX717D/E)

Approx. 430 × 98 × 289 mm (w/h/d) (SLV-SE810D1/D2/E, SX810D)

Mass

Approx. 4.1 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change without notice.

92Specifications