Downloading Images from the Camera — FTP

server setting Menu

When you click FTP server on the Administrator menu, the FTP server setting menu appears. Use this menu to set up for the FTP server function which finds a specified image and audio file stored in the built-in memory of the camera (about 8 MB) or download the still image file from the camera.

FTP server function

To activate the FTP server function, select On and click OK.

When you do not use the FTP server function, select Off and click OK.

OK/Cancel

See “Buttons common to every setting menu” on page 24.

Note

Note the followings when you log in the FTP server of the camera using the FTP client software of the computer.

•The frame rate and the operativity of the monitor window in the main viewer will degrade.

•While recording the image using the Image memory function, you cannot delete the recording directory.

•When the recorded image or audio file is deleted, the camera counts the free space of the built-in memory again at logging off.

Setting the Alarm Output

— Alarm output setting Menu

When you click Alarm output on the Administrator menu, the Alarm output setting menu appears.

You can set in this menu to control the alarm out of I/O port on the rear of the camera linked to the alarm detection, the timer and day/night.

Alarm out 1, 2 Tab

Camera the Administrating

Alarm output

To activate the Alarm output function, select On. The basic setting options are displayed below.

When you do not use the Alarm output function, select Off.

Mode

Select the mode of the Alarm output function.

Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in activity detection function.

Timer: Controls alarm output by the timer.

Day/Night: Controls the alarm output linked to the day/ night function.

Alarm

This item is displayed when Mode is set to Alarm. Select the alarm to link the alarm output function. If the selected alarm is detected, the alarm output status changes.

Sensor input: External sensor connected to sensor input of the camera I/O port

Motion detection: To set the motion detection function, click Motion detection. The Motion detection setting menu appears (see page 52).

Downloading Images from the Camera — FTP server setting Menu / Setting the Alarm Output — Alarm output setting Menu

47