Sending Images to FTP Server
— FTP client setting Menu
When you click FTP client on the Administrator menu, the FTP client setting menu appears.
Use this menu to set up for capturing and sending still images to an FTP server. By using FTP client function, you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the
Password
Type the password for the FTP server.
To confirm the password, type the same characters as you typed in the Password box.
Passive modeSet whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode.
OK/Cancel
To activate the FTP client function, select On. The FTP client setting page appears.
When you do not wish to use the FTP client function, select Off.
Note
The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function.
FTP server nameType the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server.
User nameType the user name for the FTP server.
Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the external sensor input or by the
Alarm sending
Select On to send the image and audio file to FTP server linked with the alarm detection.
Remote pathType the path to the destination up to 64 characters.
Image file name
Type the file name you want to assign to the images when sending to the FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming.
Camera the Administrating
Sending Images to FTP Server — FTP client setting Menu | 41 |
|
|