Uniden DCT736 manual Adding Extra Handsets, Compatible Handsets, Charging the Accessory Handset

Models: DCT736

1 56
Download 56 pages 58.34 Kb
Page 20
Image 20
Adding Extra Handsets

Adding Extra Handsets

Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. The accessory handsets connect to the base to make and receive calls just like the handset that came with the main base. All the handsets ring when you receive a call.

Compatible Handsets

Your phone is compatible with the following Uniden 2.4 GHz Digital Accessory Handsets: DCX640, DCX700, DCX730, and DCX750. (Please visit our website at www.uniden.com for the most up-to-date list of compatible hand- sets.) If you purchase an accessory handset, you must register the handset to the main base before use. Accessory handsets will not operate until they are registered.

Charging the Accessory Handset

The handset is powered by a rechargeable battery pack. The battery. recharges automatically when the handset is placed in the charger.

1.Connect the AC adapter to the DC IN 9V jack and to a stan- dard 120V AC wall outlet. Use only AC adapter Model Num- ber AD-0005.

. Set the charger on a desk or tabletop, then place the handset in the charger with the keypad facing forward.

3. Make sure that the charge LED illuminates. If the LED does not illuminate, check that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

4. Charge the handset battery pack for at least 15-20 hours be-

fore using your new cordless telephone for the first time.

20

Page 20
Image 20
Uniden DCT736 manual Adding Extra Handsets, Compatible Handsets, Charging the Accessory Handset