Uniden DCT736 manual Seven-Digit Dialing, Using the DirectLink Feature

Seven-Digit Dialing

If you can make a local call by dialing only 7 digits instead of 10, you can program your local area code in your phone. If you get a call from within your area code, you will only see the 7-digit phone number. If you get a call from outside your area code, you will see all 10 digits. To enter an area code, follow the steps below:

1.Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.

.Use the number keypad [0] to [9] to enter a 3-digit area code. If an area code has already been stored, it will appear in the display. Press [menu/clear] to delete the stored code, and then enter a new one.

3.Press . A confirmation tone sounds.

NOTE: Do not program an area code if you must dial all 10 digits to make a local call.

Using the DirectLink Feature

Using the DirectLink feature, a pair of handsets can function as two-way radios. You can have up to two pairs of handsets using DirectLink at a time. DirectLink communication does not interfere with the main base’s ability to make or receive telephone calls. You must set both handsets to use DirectLink communication to activate this feature. Other handsets can be used while two handsets are in DirectLink communication; however, the two handsets in DirectLink operation are not able to make or receive calls until DirectLink communication is canceled.

1. Press [menu/clear] and move the cursor to the DIRECTLINK MODE menu.

. Press . The display shows TO ENTER DIRECTLINK MODE.

PRESS SELECT.

3.Press . A confirmation tone sounds, and DIRECTLINK MODE

COMPLETE appears in the display.

38