Answering an Intercom Page
When the intercom page tone sounds, the display shows the ID of the sta- tion that is paging.
Press [ /flash] or [xfer/intercom]. If AutoTalk is on, the handset automat- ically answers the page when you remove the handset from the cradle.
To hang up an intercom page from the handset, press [
].
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a hand- set in the room you wish to monitor; it will function as a microphone. An- other station can be set to function as a remote speaker, allowing you to monitor sounds in the room.
1.Press [menu/clear] and enter the ROOM MONITOR menu. TO ROOM MONITOR appears.
.Select the station you want to monitor by. using [
] or [
].
3. Press 
. ROOM MONITOR appears, and you hear sounds in the room where the station is installed.
4. To turn off the Room Monitor, press [
] or return. the handset to the cradle.
Notes:
•This feature only works when both handsets are within. the range of the base.
•If the party is out of range, UNAVAILABLE appears in the display,. and the operation is canceled.
•While a pair of handsets is in Room/Baby Monitoring, they cannot be used to make or receive calls. Other handsets can still make and receive calls.
Handset #2
at remote location
40
