1

Confirming the Settings

 

of the Computer

2 3

4Click the [General] tab, place a check mark in the [Internet Protocol Version4 (TCP/IPv4)] box, and then click [Properties].

If a check mark has already been placed in

the [Internet Protocol Version4 (TCP/IPv4)] checkbox, click on [Internet Protocol Version4

(TCP/IPv4)], and then click [Properties].

[Internet Protocol Version 4(TCP/IPv4)] and [Internet Protocol Version 6(TCP/IPv6)] are displayed in the item list. Be sure to select [Internet Protocol Version 4(TCP/IPv4)].

When using Windows XP

Select [Internet Protocol Version (TCP/IP)].

5Select [Use the following IP address] and type the following IP address and Subnet mask in the appropriate boxes.

Example:

 [IP address]

 192.168.0.200

 [Subnet mask]

 255.0.0.0

You will use the IP address and Subnet mask again when “Setting the IP Address of the Camera.” (Page 11)

When there is a network administrator, ask for and obtain an IP address from the network administrator. If not, you can obtain an un-used IP address.

To obtain an un-used IP address, see “Confirming an IP address that is not currently used in the network” (page 10).

Click the [Use the following IP address] radio button and type the IP address and Subnet mask.