Securing the plasma to the stand
Step 3
Raise the display with the securing sleeves installed to the plasma. drop it down slowly, make sure all of the four (4) sleeves are in the M5 x 12 Phillip screws (security screws) can be used for additional
NOTE: If using a 32” plasma, secure it with the two (2) M6 x 30
Slip the sleeves through the four (4) keyholes on the back plate and keyhole slot before letting go of the plasma. On the 42" and 50" two (2) security. See figure 3.
Phillip screws supplied.
NOTE: Two (2) security screws for the 42" and 50" plasma displays. Check all hardware for proper tightness and security.
M5 x 12 phillips
screws
M6 x 30 phillips
screws
NOTE: Security screws for the 32” plasma displays. Check all hardware for proper tightness and security.
- 5 -