Trouble-shooting guide

In the event of any unexpected problems, please double-check the following points.

If after that, normal operation cannot be resumed, contact the store from which the item was purchased, or your nearest Sony dealer.

Condition

Causes/Solutions

When the POWER switch is turned on, the power indicator does not light up, nor is any sound output.

• Check that the power cord is connected.

Although the POWER indicator is lit, no sound is output.

Check whether or not the ON button is turned off. (Pages 5 and 7)

Check whether the assign button is correctly pressed. (Pages 5 and 7)

No sound is output from the TAPE IN connector.

• Check whether or not the TAPE button is turned off. (Page 4)

No sound is output from the GROUP bus.

• Check whether or not the DIRECT button is turned on. (Page 5)

 

 

No sound is output from the 2TR IN connector.

• Check whether or not the TO L-R button is turned off.

 

(Page 9)

No sound is output from the AUX 5, 6, 7 and 8 buses.

Check whether the AUX 7/8 button is pressed correctly. (Pages 5 and 7)

No sound is output from the PHONES connector or the MONITOR OUT connector.

Check whether or not all of the AFL buttons are turned off. (Page 9)

Check whether or not the PFL button is turned on. (Pages 5 and 7)

Sound from the AUX 1/2 and GROUP bus is output

• Check whether or not the TO L-R button is turned on.

through the MASTER OUTPUT.

(Page 9)

 

 

The sound is distorted.

• Check whether the settings of the LEVEL controls and –10 dBu

 

button are correct. (Pages 4 and 7)

 

• Check whether or not the line level output equipment is

 

connected to the MIC connector. (Page 10)

 

 

14!¢