Troubleshooting

Power will not turned on.

• Is the power cord unplugged?

 

• Is the curcuit breaker working? (See page 7.)

 

 

No sound.

• Does the EMG indicator turn off? (See pages 4 and 7.)

 

• Does the PROTECTION indicator turn off? (See page 4.)

 

 

No sound is output to MASTER OUTPUT

• Has the ASSIGN switch been set to OFF? (See page 8.)

or SPEAKER terminals from microphone.

• Has the MIC GROUP knob been set to –∞? (See page 5.)

 

 

No sound from wireless microphone.

• Is the channels of microphone and tuner unit matching?

 

And does the RF/SIGNAL indicator light on when the microphone

 

is turned on? (See page 9.)

 

• Is the antenna connected correctly?

 

 

Sound is heard in monaural.

Has the MODE switch been set to STEREO? (See page 8.)

 

 

Sound is distorted.

Is the CLIP indicator lighting on? (See page 4.)

 

 

No sound from MIC4.

Has another microphone been connected to MIC4 terminal

 

on the front panel?(See page 4.)

 

 

Wireless remote control does not function.

• Has a plug been connected to CONTROL-S input terminal

 

on the rear panel?(See page 6.)

 

• Are the remote control batteries dead?(See page 8.)

 

 

Signal of the ST2 can not be recorded.

Signal from ST2 does not output to REC OUTPUT. (See page 5.)

 

 

Printed in Japan