1080I (50 and 60 Hz)

VGA Computer Graphics (Modes 1, 2 and 3, 60 - 85 Hz)

VESA 800x600 Computer Graphics (56 - 85 Hz)

VESA 1024 x 768 Computer Graphics (43 – 85 Hz)

VESA 1152 x 864 Computer Graphics (70 – 75 Hz)

SUN 1152 x 900 Computer Graphics (65 – 76 Hz)

VESA 1280 x 1024 Computer Graphics (43 – 60 Hz)

Mac 13” Computer Graphics

Mac 16” Computer Graphics

4.0User Interface / Controllability Information

Control of this device shall be accomplished through one of the following methods:

Front panel control

Serial control jack for control by external control systems Advanced serial control jack for control by external control systems

Parallel (Contact closure) control jack for control by external control systems USB control jacks for control by computer

All of these control methods shall be standard to the device.

In addition, this device shall be able to control other source and display devices. This shall be accomplished through one or more of the following methods.

Serial control jacks for control of source devices Serial control jack for control of projector or display Advanced serial control jack for control of projector or display

All of these control methods shall also be standard to the device.

The front panel control panel shall allow the operator manual control over setup and configuration of the device. All functions available for control shall be directly accessible on individual controls, and metering of various audio signals shall be possible from independent LED’s.

The serial control jack shall employ the use of a standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall accept unidirectional serial commands that provide full control over the device.

The following device functions shall be available for control using this method.

Pass through for any compatible projector or display device from projector or display device remote from supplying manufacturer