5.0Performance Specifications

This device shall fully support all video color systems using pass-though capability.

The maximum video bandwidth shall be at least 10MHz. The maximum RGB bandwidth shall be at least 150MHz. The device shall be capable of passing a resolution of at least 1280x1024 pixels at 60Hz refresh.

This device shall support audio signals within the frequency range of 20Hz to 20,000Hz.

This device shall include a built-in stereo audio amplifier that is capable of producing 150w per channel on 8 Ohm speaker loads, 200w on 4 Ohm speaker loads and 150w when used with 70V speakers.

This device shall have a minimum audio signal to noise ratio of 94db, with less than -85db of crosstalk between adjacent audio channels.

This device shall provide +48V DC power to the microphone inputs for use with condenser type microphones. This feature shall be switchable on or off independently on each microphone input channel.

This device shall provide slots for the integration of two wireless microphone tuner modules, for use with handheld or body back style transmitters. The transmitters and modules shall be available from the supplying manufacturer as options. A UHF antenna shall also be available as an option for use with the wireless system.

6.0Dimensional Information

This device shall have maximum cabinet dimensions of 5.25 inches high by 19 inches wide and 13.88 inches deep. This device shall fit into a standard 19-inch EIA rack, occupying no more than 3 EIA rack spaces.

This device shall not weigh more than 29 pounds.

7.0Connectivity Information

This device shall provide for connection of multiple source devices without employing the use of an external interface. These connections shall include the following:

(4) Balanced microphone inputs on XLR 3-pin connectors

(2)Balanced microphone or line inputs on XLR 3-pin connectors

(1)Unbalanced stereo line input on RCA (Phono) connectors