Listening to the sound

1 button

VOLUME +/– buttons

Check the following before operating the unit.

–If you have been listening to the sound from a Bluetooth stereo audio source device, terminate the Bluetooth connection.

1Press the 1 button to turn on this unit.

The power indicator (green) lights up.

2Start playing on the source device.

3Adjust the volume.

Set the volume of the source device to moderate level, and press the VOLUME +/– buttons on this unit.

Note

A beep sounds when the volume is set to minimum or maximum.

4Press and hold the 1 button to turn off this unit after using.

The power indicator goes off.

Notes

•If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or sensitivity may be reduced significantly.

•If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted.

•If the source device’s headphone output has a line switch, better sound will be heard if it is set to on. See the operating instructions of the source device.

•When the sound of a Bluetooth stereo audio device is being reproduced using the Bluetooth connection (when both the power indicator (green) and communication status indicator (blue) light up), the sound from a device connected to the INPUT jack cannot be heard. Terminate Bluetooth connection to listen to the sound of a device connected to the INPUT jack.

14