Press AMP MENU.

Step 5: Connecting the AC Power Cord (Mains Lead)

Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system (page 14). Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

"/1

"/1

To turn on the systemPress "/1.To turn off the system

Press "/1. The system enters standby mode. While playing a disc, do not turn off the system by pressing "/1. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press "/1.

Step 6: Turning off the Demonstration

"/1

AMP MENU

X/x/c

ENTER

After connecting the AC power cord (mains lead), the demonstration appears in the front panel display. When you press "/1 on the remote, the demonstration turns off.

Note

When you press "/1 on the system, the demonstration does not turn off.

When you set the demonstration mode in the AMP menu to on, the demonstration does not turn off even though you press "/1 on the remote. To turn off the demonstration, set the demonstration mode to off, then press "/1 on the remote.

Setting the demonstration mode on/off

1

2 Press X/x repeatedly until “DEMO” appears in the front panel display, then press ENTER or c.

3 Press X/x to select the setting.DEMO OFF: sets the demonstration mode off.DEMO ON: sets the demonstration mode on.4 Press ENTER or AMP MENU.The AMP menu turns off.
24GB