[FRONT] [YES]

[CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used.

[SURROUND] [BEHIND]: Select this if surround speakers are located in section B. [SIDE]: Select this if surround speakers are located in section A. [NONE]: Select this if no surround speaker is used.

[SUBWOOFER] [YES]

Note

•When you select an item, the sound cuts off for a moment.

x[DISTANCE]

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 25), the settings is automatically displayed.

1.0- 7.0 m/

4 - 23 ft

0.0 - 7.0 m/

0 - 23 ft

Be sure to change the value in the Setup Display when you move the speakers.

[FRONT]

Front speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

 

meter (1 ft) increments from 1.0 to

 

7.0 meters (4 to 23 ft).

 

 

[CENTER]

Center speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

(appears when

meter (1 ft) increments from 0.0 to

you set

7.0 meters (0 to 23 ft).

[CENTER] to

 

[YES] in the

 

[SIZE] setting.)

 

 

 

[SURROUND]

Surround speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

(appears except

meter (1 ft) increments from 0.0 to

when you set

7.0 meters (0 to 23 ft).

[SURROUND]

 

to [NONE] in the

 

[SIZE] setting.)

 

 

 

*When you perform the Quick Setup (page 25), the default settings are changed.

Note

•When you set the distance, the sound cuts off for a moment.

•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the surround speakers farther away from your listening position than the front speakers.

•Depending on the input stream, the [DISTANCE] setting may not be effective.

x[LEVEL (FRONT)]

You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L]Set this between –6 dB and 0 dB

0 dB

in 1 dB increments.

 

 

[R]Set this between –6 dB and 0 dB

0 dB

in 1 dB increments.

 

 

[CENTER]

Set this between –6 dB and +6 dB

0 dB

in 1 dB increments.

(appears when you

 

set [CENTER] to

 

[YES] in the [SIZE]

 

setting.)

 

 

 

[SUBWOOFER]

Set this between –6 dB and +6 dB

0 dB

in 1 dB increments.

 

 

x[LEVEL (SURROUND)]

You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

(This settings appear except when you set [SURROUND] to [NONE] in the [SIZE] setting.)

[L]Set this between –6 dB and +6 dB in

0 dB

1 dB increments.

 

 

[R]Set this between –6 dB and +6 dB in

0 dB

1 dB increments.

 

 

72GB