Press ENTER.

6

7

Press X/x to select the preset number you want.

Press ENTER.

The station is stored.

For automatic tuning, press and hold TUNING + or –. Press x when you stop the automatic tuning.

•If an FM program is noisy, press FM MODE so that “MONO” appears in the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

•To improve reception, reorient the supplied antennas (aerials).

•You can check the frequency by pressing DISPLAY repeatedly (page 47).

8 Repeat 1 to 7 to store other stations.To change the preset numberRestart from Step 1.Listening to the radio

Preset radio stations in the system’s memory first (see “Presetting radio stations” (page 63)).

1 Press FUNCTION repeatedly until “FM”or “AM” appears in the front panel display.The last received station is tuned in.2 Press PRESET + or – repeatedly to select the preset station you want.Each time you press the button, the system tunes in one preset station.Each time you press TUNER/BAND, the band changes between FM and AM.3 Adjust the volume by pressing VOLUME +/–.To turn off the radio

Press "/1.

To listen to non-preset radio stations

Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or – repeatedly.

Naming preset stations

You can enter a name for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected.

Note that no more than one name can be entered for each preset station.

1 Press FUNCTION repeatedly until “FM”

or “AM” appears in the front panel display.

The last station you received is tuned in.

2 Press PRESET + or – repeatedly to select the preset station you want to create an index name for.

3 Press TUNER MENU.4 Press C/X/x/c repeatedly until “NAMEIN” appears in the front panel display.

5

6 Create a name by using the cursor buttons.

Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name.

If you make a mistake

Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character.

64GB