Microsoft VPN
Figure 50: VPN Wizard – General Screen
General Settings
Policy Name
Enable Policy
Allow NetBIOS traffic
Remote VPN Endpoint
Keys
Enter a suitable name. This name is not supplied to the remote VPN. It is used only to help you manage the policies.
Enable or disable the policy as required. For each remote VPN, only 1 policy can be enabled at any time.
Enable this if you require NetBIOS traffic to be transferred through the VPN tunnel. NetBIOS is used by Microsoft (Windows) networking. This setting should not be enabled unless necessary, because it increases traffic volume.
The Internet IP address of the remote VPN endpoint (Gateway or client).
•Dynamic. Select this if the Internet IP address is unknown. In this case, only incoming connections are possible.
•Fixed. Select this if the remote endpoint has a fixed Internet IP address. If selected, enter the Internet IP address of the remote end- point.
•Domain Name. Select this if the remote endpoint has a Domain Name associated with it. If selected, enter the Domain Name of the remote endpoint.
Select Manually assigned or IKE (Internet Key Exchange) as required. If you are setting up both endpoints, using IKE is recommended.
2.Click Next to continue. You will see a screen like the following:
75
