Dest IP | These settings determine which traffic, based on their destination |
| IP address, is covered by this rule. |
| Select the desired option: |
| • Any - All traffic from the source port is covered by this rule. |
| • Single address - Enter the required IP address in the "Start IP |
| address" field". You can ignore the "Subnet Mask" field. |
| • Range address - If this option is selected, you must complete |
| both the "Start IP address" and "Finish IP address" fields. |
| You can ignore the "Subnet Mask" field. |
| • Subnet address - If this option is selected, enter the required |
| mask in the "Subnet Mask" field. |
Services | Select the desired Service or Services. This determines which |
| packets are covered by this rule, based on the protocol (TPC or |
| UDP) and port number. If necessary, you can define a new |
| Service on the "Services" screen, by defining the protocols and |
| port numbers used by the Service. |
Action | Select the desired action for packets covered by this rule: |
Log | This determines whether packets covered by this rule are logged. |
| Select the desired option. |
60
