TRENDnet BRV204 manual VPN Wizard - IKE Phase 1 Screen, IKE Phase 1 IKE SA

Microsoft VPN

IKE Phase 1

If you selected IKE, the following screen is displayed after the Traffic Selector screen. This screen sets the parameters for the IKE SA.

Figure 53: VPN Wizard - IKE Phase 1 Screen

IKE Phase 1 (IKE SA)

Local Identity This setting must match the "Remote Identity" on the remote VPN. Select the desired option, and enter the required data in the "Local Identity Data" field.

•WAN IP Address - This is the most common method. If se- lected, no input is required.

•Fully Qualified Domain Name - enter the Domain Name assigned to this device.

•Fully Qualified User name - This name does not have to a valid Internet Domain Name. E-mail addresses are often used for this entry.

•DER ANS.1 DN - This must be a DER ANS.1 Domain Name.

Remote Identity This setting must match the "Local Identity" on the remote VPN. Select the desired option, and enter the required data in the "Remote Identity Data" field.

•IP Address - This is the most common method. If selected, no input is required.

•Fully Qualified Domain Name - enter the Domain Name assigned to this device.

•Fully Qualified User name - This name does not have to a valid Internet Domain Name. E-mail addresses are often used for this entry.

•DER ANS.1 DN - This must be a DER ANS.1 Domain Name.

79