
Connection Log
Connection Log
•The Connection Log shows status messages relating to the existing connection.
•The Clear Log button will restart the Log, while the Refresh button will update the messages shown on screen.
Buttons |
|
Connect | If not connected, establish a connection to Telstra Big Pond. |
Disconnect | If connected to Telstra Big Pond, terminate the connection. |
Clear Log | Delete all data currently in the Log. This will make it easier to read |
| new messages. |
Refresh | Update the data on screen. |
Connection Details - SingTel RAS
If using the SingTel RAS access method, a screen like the following example will be displayed when the "Connection Details" button is clicked.
Figure 24: Connection Details - SingTel RAS
Data - SingTel RAS Screen
Internet |
|
RAS Plan | The RAS Plan which is currently used. |
Physical Address | The hardware address of this device, as seen by remote devices on |
| the Internet. (This is different to the hardware address seen by |
| devices on the local LAN.) |
IP Address | The IP Address of this device, as seen by Internet users. This address |
| is allocated by your ISP (Internet Service Provider). |
Network Mask | The Network Mask associated with the IP Address above. |
Default Gateway | The IP Address of the remote Gateway or Router associated with the |
| IP Address above. |
36