One for All URC8820N warranty Unlocking All Volume Control Restoring Default Setting

2.Enter 9 9 3 and then press any mode key once (e.g., TV). The LED will blink twice.

3.Now, when you press VOL +, VOL -, or MUTE, the volume of the selected device (e.g., TV) will be controlled regardless of the mode you have selected.

Unlocking Volume Control For A Single Device (Individual Volume Unlock)

1.After performing Global Volume Lock (see above), press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode.

2.Press and hold SET until the LED (red light) blinks twice, then release SET.

3.Enter 9 9 3 and then press VOL - once. The LED will blink four times.

4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.

5.Now, after you select a device that has volume unlocked (e.g., AUD), pressing VOL +, VOL -, or MUTE, will control the device’s volume only in its own mode.

Unlocking All Volume Control

(Restoring Default Setting)

NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.).

1.On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 3 and then press VOL + once. The LED will blink four times.

3.Volume will again be independently controlled according to its default states for all programmed devices.

Using Macros

You can program the M1 and M2 keys on your remote to perform repetitive, time-consuming operations for easy, convenient access through the press of a single key.

Macro keys are ideal for home theater operations, setting a favorite channel, guide steps, or other multiple functions you would like to control with one key press. Moreover, each macro key can hold up to a total of 20 key presses.

NOTE: Programming a new macro over an existing one will erase the original macro.

Programming A Favorite Channel

With so many channels available through your cable or satellite system provider, you can program a macro that directly selects a favorite channel with one key press.

For example, let’s assume your favorite cable programs are on channel 52. Use the following instructions to program a macro key for direct access of this channel:

NOTE: This example assumes the TV is tuned to the correct Input to view your cable box.

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

9