One for All URC8820N warranty Setting Up Your Components

DEVICE	CONTROLS THESE DEVICES
KEY
CD	CD, Home Automation, CD/R (Recorders)
PVR	PVR/DVR Only Devices
AUD	Tuner, Amp, Misc. Audio, HTiB (Home
	Theater In A Box)
AUX	Tuner, Amp, Misc. Audio, HTiB (Home
	Theater In A Box)

Setting Up Your Components

This remote is preprogrammed at the factory to operate a Sony TV, DVD and VCR, an RCA DirecTV Satellite box, a Sony Tivo PVR, a Pioneer Receiver and CD, and a Sony Receiver (in the AUX Mode). To control devices other than the default brands, perform the following steps; otherwise skip this section.

NOTE: For Combo Device control, see the next section.

1.Turn on a device (e.g., TV, VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2.On the remote control, press a device key once (i.e., TV, CBL/SAT, VCR, DVD, CD, PVR, AUD, or AUX).

3.Press and hold SET until the LED (red light) blinks twice, then release SET.

4.Use the accompanying code lists to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try “Searching for Your Code.”

NOTE: If the device does not have a POWER key, press the (PLAY) key.

6.Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code in the following boxes:

TV Code:

Brand Name:____________________

VCR Code:

Brand Name:____________________

CD Code:

Brand Name:____________________

AUD Code:

Brand Name:____________________

5