TRENDnet BRV204 manual Configuration Program, Preparation

TW100-BRV204 User’s Guide

Use the Microsoft VPN feature:

•PPTP Server in the TW100-BRV204 .

•User and Client setup.

•Checking VPN connection Status.

Configure or use any of the following:

•Configuration File backup and restore.

•Network Diagnostic

•PC Database

•Remote Administration

•Routing

•Upgrade Firmware

•UPnP

Chapter 9:

Microsoft VPN

Chapter 9:

Other Features and Settings

Where use of a certain feature requires that PCs or other LAN devices be configured, this is also explained in the relevant chapter.

Configuration Program

The TW100-BRV204 contains an HTTP server. This enables you to connect to it, and config- ure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers:

•Netscape V4.08 or later

•Internet Explorer V4 or later

Preparation

Before attempting to configure the TW100-BRV204 , please ensure that:

•Your PC can establish a physical connection to the TW100-BRV204 . The PC and the TW100-BRV204 must be directly connected (using the Hub ports on the TW100- BRV204 ) or on the same LAN segment.

•The TW100-BRV204 must be installed and powered ON.

•If the TW100-BRV204 's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the TW100-BRV204 is allocated a new IP Address during configuration.

Using UPnP

If your Windows system supports UPnP, an icon for the TW100-BRV204 will appear in the system tray, notifying you that a new network device has been found, and offering to create a new desktop shortcut to the newly-discovered device.

•Unless you intend to change the IP Address of the TW100-BRV204 , you can accept the desktop shortcut.

•Whether you accept the desktop shortcut or not, you can always find UPnP devices in My Network Places (previously called Network Neighborhood).

10