Hitachi SJ700-2 instruction manual Free-setting V/f voltage To 800.0

Chapter 8 List of Data Settings

					Default		Setting during	Change
								during
							operation
	Code	Function name	Monitored data or setting					operation	Page
							(allowed or
								(allowed or
				_FF	_FEF	_FUF	not)
								not)
	b078	Cumulative input power data	Clearance by setting "01" and pressing the STR key		00		{	{
		clearance							4-4
	b079	Cumulative input power display	1. to 1000.		1.		{	{
		gain setting
	b082	Start frequency adjustment	0.10 to 9.99 (Hz)		0.50		¯	{	4-42
	b083	Carrier frequency setting	0.5 to 15.0 (kHz) (subject to derating)		5.0		¯	¯	4-43
	b084	Initialization mode (parameters or	00 (clearing the trip history), 01 (initializing the data),		00		¯	¯
		trip history)	02 (clearing the trip history and initializing the data)						4-75
	b085	Country code for initialization	00 (Japan), 01 (EU), 02 (U.S.A.)	00	01	02	¯	¯
	b086	Frequency scaling conversion	0.1 to 99.0		1.0		{	{	4-2
		factor
	b087	STOP key enable	00 (enabling), 01 (disabling), 02 (disabling only the function to stop)		00		¯	{	4-9
Others	b088	Restart mode after FRS	00 (starting with 0 Hz), 01 (starting with matching frequency), 02 (starting		00		¯	{	4-52
			with active matching frequency)
	b089	Automatic carrier frequency	00: invalid, 01: valid		00		¯	¯	4-44
		reduction
	b090	Dynamic braking usage ratio	0.0 to 100.0 (%)		0.0		¯	{	4-45
	b091	Stop mode selection	00 (deceleration until stop), 01 (free-run stop)		00		¯	{	4-9
	b092	Cooling fan control	00 (always operating the fan), 01 (operating the fan only during inverter		00		¯	{
			operation [including 5 minutes after power-on and power-off])
	b095	Dynamic braking control	00 (disabling), 01 (enabling [disabling while the motor is topped]), 02		00		¯	{	4-45
			(enabling [enabling also while the motor is topped])
	b096	Dynamic braking activation level	330 to 380, 660 to 760(V)		360/		¯	{
					720
	b098	Thermistor for thermal protection	00 (disabling the thermistor), 01 (enabling the thermistor with PTC), 02		00		¯	{
		control	(enabling the thermistor with NTC)						4-72
	b099	Thermal protection level setting	0. to 9999. (Ω)		3000.		¯	{
	b100	Free-setting V/f frequency (1)	0. to "free-setting V/f frequency (2)" (Hz)		0.		¯	¯
	b101	Free-setting V/f voltage (1)	0.0 to 800.0 (V)		0.0		¯	¯
characteristic	b102	Free-setting V/f frequency (2)	0. to "free-setting V/f frequency (3)" (Hz)		0.		¯	¯
	b103	Free-setting V/f voltage (2)	0.0 to 800.0 (V)		0.0		¯	¯
	b104	Free-setting V/f frequency (3)	0. to "free-setting V/f frequency (4)" (Hz)		0.		¯	¯
	b105	Free-setting V/f voltage (3)	0.0 to 800.0 (V)		0.0		¯	¯
of V/f	b106	Free-setting V/f frequency (4)	0. to "free-setting V/f frequency (5)" (Hz)		0.		¯	¯	4-17
	b107	Free-setting V/f voltage (4)	0.0 to 800.0 (V)		0.0		¯	¯
setting	b109	Free-setting V/f voltage (5)	0.0 to 800.0 (V)		0.0		¯	¯
	b108	Free-setting V/f frequency (5)	0. to "free-setting V/f frequency (6)" (Hz)		0.		¯	¯
Free
	b110	Free-setting V/f frequency (6)	0. to "free-setting V/f frequency (7)" (Hz)		0.		¯	¯
	b111	Free-setting V/f voltage (6)	0.0 to 800.0 (V)		0.0		¯	¯
	b112	Free-setting V/f frequency (7)	0. to "free-setting V/f frequency (8)" (Hz)		0.		¯	¯
	b113	Free-setting V/f voltage (7)	0.0 to 800.0 (V)		0.0		¯	¯
	b120	Brake Control Enable	00 (disabling), 01 (enabling)		00		¯	{
	b121	Brake Wait Time for Release	0.00 to 5.00 (s)		0.00		¯	{
	b122	Brake Wait Time for Acceleration	0.00 to 5.00 (s)		0.00		¯	{
	b123	Brake Wait Time for Stopping	0.00 to 5.00 (s)		0.00		¯	{	4-81
	b124	Brake Wait Time for Confirmation	0.00 to 5.00 (s)		0.00		¯	{
	b125	Brake Release Frequency Setting	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
	b126	Brake Release Current Setting	0.0 to 2.00 x "rated current"	Rated current of inverter			¯	{
Others	b127	Braking frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
	b130	Overvoltage suppression enable	00 (disabling the restraint), 01 (controlled deceleration), 02 (enabling		00		¯	{
			acceleration)
	b131	Overvoltage suppression level	330 to 390 (V) (200 V class model), 660 to 780 (V) (400 V class model)		380/		¯	{
					760
	b132	Acceleration and deceleration	0.10 to 30.00 (s)		1.00		¯	{	4-41
		rate at overvoltage suppression
	b133	Overvoltage suppression	0.00 to 2.55		0.50		{	{
		propotional gain
	b134	Overvoltage suppression Integral	0.000 to 9.999 / 10.00 to 65.53 (s)		0.060		{	{
		time

8 - 8