Hitachi SJ700-2 instruction manual Avr

Chapter 8 List of Data Settings

					Default		Setting	Change
	Code	Function name	Monitored data or setting				during	during	Page
				_FF	_FEF	_FUF	operation	operation
							(allowed or	(allowed or
							not)	not)
AVR	A081	AVR function select	00 (always on), 01 (always off), 02 (off during deceleration)	02	00	00	¯	¯	4-11
	A082	AVR voltage select	200 V class: 200, 215, 220, 230, 240 (V)	200/400	230/400	230/460	¯	¯
			400 V class: 380, 400, 415, 440, 460, 480 (V)
	A085	Operation mode selection	00 (normal operation), 01 (energy-saving operation), 02 (fuzzy operation)		00		¯	¯	4-32
	A086	Energy saving mode tuning	0.1 to 100.0		50.0		{	{
	A092	Acceleration (2) time setting	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
	A292	Acceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
function		2nd motor
		3rd motor
	A392	Acceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
acceleration/deceleration	A093	Deceleration (2) time setting	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
	A293	Deceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
		2nd motor
	A393	Deceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00		{	{
		3rd motor
	A094	Select method to switch to	00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only		00		¯	¯	4-30
		Acc2/Dec2 profile	when rotation is reversed)
and	A294	Select method to switch to	00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only		00		¯	¯
		Acc2/Dec2, 2nd motor	when rotation is reversed)
mode	A095	Acc1 to Acc2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	¯
		transition point
Operation	A096	Acc1 to Acc2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	¯
		Dec1 to Dec2 frequency
	A295	transition point, 2nd motor	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	¯
		transition point
	A296	Dec1 to Dec2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	¯
		transition point, 2nd motor
	A097	Acceleration curve selection	00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)		00		¯	¯	4-31
	A098	Deceleration curve setting	00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)		00		¯	¯
	A101	[OI]-[L] input active range start	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
		frequency
	A102	[OI]-[L] input active range end	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
		frequency
adjustment	A104	[OI]-[L] input active range start	"[OI]-[L] input active range start current" to 100. (%)		100.		¯	{
		current
	A103	current	0. to "[OI]-[L] input active range end current" (%)		20.		¯	{
		[OI]-[L] input active range end
frequency
		[O2]-[L] input active range start
	A105	[OI]-[L] input start frequency	00 (external start frequency), 01 (0 Hz)		00		¯	{	4-14
		enable
External	A111	frequency	-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
	A112	frequency	-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
		[O2]-[L] input active range end
	A113	[O2]-[L] input active range start	-100. to 02 end-frequency rate (%)		-100.		¯	{
		voltage
	A114	[O2]-[L] input active range end	"02 start-frequency rate" to 100. (%)		100.		¯	{
		voltage
Acceleration and deceleration	A132	Acceleration curve constants	01 (smallest swelling) to 10 (largest swelling)		02		¯	{
	A131	setting	01 (smallest swelling) to 10 (largest swelling)		02		¯	{	4-31
		Deceleration curve constants
		setting
		Operation-target frequency	00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via
frequency	A141		OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string		02		¯	{
		Operation-target frequency							4-13
			00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via
		selection 1	frequency input)
target-Operation	A142	selection 2	OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string		03		¯	{
			frequency input)						4-14
	A143	Operator selection	00 (addition: A141 + A142), 01 (subtraction: A141 - A142), 02 (multiplication:		00		¯	{
			A141 x A142)
	A145	Frequency to be added	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00		¯	{
	A146	Sign of the frequency to be	00 (frequency command + A145), 01 (frequency command - A145)		00		¯	{
		added
	A150	EL-S-curve acceleration	0. to 50. (%)		25.		¯	¯
Accelerationand deceleration		ratio 1
	A151	EL-S-curve acceleration	0. to 50. (%)		25.		¯	¯
		ratio 2							4-31
	A152	EL-S-curve deceleration	0. to 50. (%)		25.		¯	¯
		ratio 1
	A153	EL-S-curve deceleration	0. to 50. (%)		25.		¯	¯
		ratio 2

*1 This setting is valid only when the OPE-SR is connected.

8 - 5