Hitachi SJ700-2 instruction manual Rpm

Chapter 8 List of Data Settings

					Default			Setting	Change
								during	during
	Code	Function name	Monitored data or setting					operation	operation	Page
				_FF		_FEF	_FUF	(allowed	(allowed
								or not)	or not)
	P001	Operation mode on expansion card	00 (tripping), 01 (continuing operation)		00			¯	{
		1 error								4-79
	P002	Operation mode on expansion card	00 (tripping), 01 (continuing operation)		00			¯	{
		2 error
	P011	Encoder pulse-per-revolution	128. to 9999., 1000 to 6553(10000 to 65535) (pulses)		1024.			¯	¯	4-96
		(PPR) setting
	P012	Control pulse setting	00 (ASR), 01 (APR), 02 (APR2), 03 (HAPR)		00			¯	¯	4-96
	P013	Pulse train mode setting	00 (mode 0), 01 (mode 1), 02 (mode 2)		00			¯	¯	4-99
	P014	Home search stop position setting	0. to 4095.		0.			¯	{
	P015	Home search speed setting	"start frequency" to "maximum frequency" (up to 120.0) (Hz)		5.00			¯	{	4-104
	P016	Home search direction setting	00 (forward), 01 (reverse)		00			¯	¯
	P017	Home search completion range	0. to 9999., 1000 (10000) (pulses)		5.			¯	{	4-99
		setting
	P018	Home search completion delay	0.00 to 9.99 (s)		0.00			¯	{	4-99
		time setting
	P019	Electronic gear set position	00 (feedback side), 01 (commanding side)		00			¯	{
		selection
	P020	Electronic gear ratio numerator	0. to 9999.		1.			{	{	4-101
		setting
	P021	Electronic gear ratio denominator	0. to 9999.		1.			{	{
		setting
	P022	Feed-forward gain setting	0.00 to 99.99, 100.0 to 655.3		0.00			{	{	4-101
	P023	Position loop gain setting	0.00 to 99.99, 100.0		0.50			{	{
	P024	Position bias setting	-204 (-2048.) / -999. to 2048.		0.			{	{	4-103
	P025	Temperature compensation	00 (no compensation), 01 (compensation)		00			¯	{	4-87
		thermistor enable
	P026	Over-speed error detection level	0.0 to 150.0 (%)		135.0			¯	{	5-5
		setting
	P027	Speed deviation error detection	0.00 to 99.99, 100.0 to120.0 (Hz)		7.50			¯	¯	4-96
functions		level setting
	P029	Denominator of motor gear ratio	0. to 9999.		1.			¯	{
	P028	Numerator of motor gear ratio	0. to 9999.		1.			¯	{	4-103
Optional
	P032	Positioning command input	00 (digital operator), 01 (option 1), 02 (option 2)		00			¯	{	−
	P031	Accel/decel time input selection	00 (digital operator), 01 (option 1), 02 (option 2), 03 (easy sequence)		00			¯	¯	4-10
		selection
	P033	Torque command input selection	00 (O terminal), 01 (OI terminal), 02 (O2 terminal), 03 (digital operator)		00			¯	¯
	P034	Torque command setting	0. to 200. (%)		0.			{	{	4-98
	P035	Polarity selection at the torque	00 (as indicated by the sign), 01 (depending on the operation direction)		00			¯	¯
		command input via O2 terminal
	P036	Torque bias mode	00 (disabling the mode), 01 (digital operator), 02 (input via O2 terminal)		00			¯	¯
	P037	Torque bias value	-200. to +200. (%)		0.			{	{
	P038	Torque bias polarity selection	00 (as indicated by the sign), 01 (depending on the operation direction)		00			¯	¯	4-98
	P039	Speed limit for torque-controlled	0.00 to "maximum frequency" (Hz)		0.00			{	{
		operation (forward rotation)
	P040	Speed limit for torque-controlled	0.00 to "maximum frequency" (Hz)		0.00			{	{
		operation (reverse rotation)
	P044	DeviceNet comm watchdog timer	0.00 to 99.99 (s)		1.00			¯	¯
	P045	Inverter action on DeviceNet comm	00 (tripping), 01 (tripping after decelerating and stopping the motor), 02		01
			(ignoring errors), 03 (stopping the motor after free-running), 04					¯	¯
		error
			(decelerating and stopping the motor)
	P046	DeviceNet polled I/O: Output	20, 21, 100		21			¯	¯
		instance number
										−
	P047	DeviceNet polled I/O: Input	70, 71, 101		71			¯	¯
		instance number
		Inverter action on DeviceNet idle	00 (tripping), 01 (tripping after decelerating and stopping the motor), 02
	P048		(ignoring errors), 03 (stopping the motor after free-running), 04		01			¯	¯
		mode
			(decelerating and stopping the motor)
	P049	DeviceNet motor poles setting for	0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38		0			¯	¯
		RPM	(poles)
	P055	Pulse-string frequency scale	1.0 to 50.0 (kHz)		25.0			¯	{
	P056	Time constant of pulse-string	0.01 to 2.00 (s)		0.10			¯	{
		frequency filter								4-112
	P057	Pulse-string frequency bias	-100. to +100. (%)		0.			¯	{
	P058	Pulse-string frequency limit	0. to 100. (%)		100.			¯	{

8 - 15