Hitachi SJ700-2 instruction manual FM terminal, Pulse output terminal, FM siginal selection

Chapter 4 Explanation of Functions

4.2.81 FM terminal		Related code
	C027: [FM] siginal selection
You can monitor the inverter output frequency and output current via	b081: [FM] terminal analog meter
the FM terminal on the control circuit terminal block. The FM terminal is	adjustment
	C030: Digital current monitor reference
a pulse output terminal.	value
(1) FM siginal selection	C105: [FM] terminal analog meter
	adjustment

Select the signal to be output from the FM terminal among those shown below.

If you select "03" (digital output frequency), connect a digital frequency counter to the FM terminal. To monitor other output signals, use an analog meter.

Item	Data	Description	Full-scale value
	00	Output frequency (See example 1.)	0 to maximum frequency (Hz) (*3)
	01	Output current (See example 1.)	0 to 200%
	02	Output torque (*1) (See example 1.)	0 to 200%
	03	Digital output frequency (See example 2.)	0 to maximum frequency (Hz) (*3)
	04	Output voltage (See example 1.)	0 to 133% (75% of full scale is equivalent
			to 100%)
	05	Input power (See example 1.)	0 to 200%
C027	06	Electronic thermal overload (See example	0 to 100%
		1.)
	07	LAD frequency (See example 1.)	0 to maximum frequency (Hz)
	08	Digital current monitoring (See example 2.)	(*2)
	09	Motor temperature (See example 1.)	0ºC to 200ºC (0ºC is output when the
			motor temperature is 0ºC or less.)
	10	Heat sink temperature (See example 1.)	0ºC to 200ºC (0ºC is output when the
			motor temperature is 0ºC or less.)
	12	General analog YA (0) (See example 1.)	0 to 100%

*1 This signal is output only when the V/F characteristic curve selection (see Section 4.2.18) is the sensorless vector control, 0Hz-range sensorless vector control, or vector control with sensor.

(Example 1) When 00, 01, 02, 04, 05, 06, 07, 09, 10 or 12 is (Example 2) When 03 or 08 us selected slected

t	t
T	T
Cycle (T): Fixed (6.4 ms)	Cycle (T): Varied
Duty (t/T): Varied	Duty (t/T): Fixed (1/2)

*2 Digital current monitoring

If the output current matches the digital current monitor reference value (C030), the FM terminal will output a signal indicating 1,440 Hz.

Item	Function code	Range of data	Description
Digital current monitor reference value	C030	"0.2 x rated current" to	Setting of the current for
		"2.0 x rated current" (A)	1,440 Hz output

*3 The actually detected output frequency is output when the V/F characteristic curve selection is the vector control with sensor (A044 = 05).

*4 For detail of the function, refer “Programming software EZ-SQ user manual”.

*5 When b086 (frequency scaling conversion facto is set, the value converted by gain is diplayed. (refer 4.1.7 Scaled output frequency monitoring)

(2) FM terminal analog meter adjustment

Adjust the inverter output gain for the external meter connected to the FM terminal.

Item	Function code
[FM] terminal analog meter	C105
adjustment

Range of data

50. to 200. (%)

Description

Setting of the gain for FM monitoring

4 - 73