Hitachi SJ700-2 instruction manual Corresponding to the function code. Data display *1*2

Chapter 3 Operation

Key operation and transition of the

codes on display

Key operation and transition of the monitored data on display

Pressing the	1	or	2 key respectively scrolls up or down the code displayed in code display mode or
increases or decreases the numerical data displayed in data display mode.
Press the 1	or	2	key until the desired code or numerical data is shown. To scroll codes or
increase/decrease numerical data faster, press and hold the key.
			Monitor mode
				Pressing the FUNC key with a function code displayed shows the
			FUNC	monitored data corresponding to the function code.
				(Monitor display) (*1)
			FUNC or STR
				Pressing the FUNC or STR key with the monitored data displayed reverts
				to the display of the function code corresponding to the monitored data.
				* With the factory setting, the monitor shows	initially after
				power-on.
				Pressing the FUNC key in this status changes the display to		.

Function or extended function mode

Pressing the FUNC key with a function code displayed shows the data

corresponding to the function code. (Data display) (*1)(*2)

Up to the

maximum limit

Data setting

Pressing the 1 or 2 key respectively increases or decreases the displayed numerical data.

(Press the key until the desired data is shown.)

FUNC

FUNC

or

STR

Pressing the STR key with numerical data displayed stores the data and then returns to the display of the corresponding function code.

Note that pressing the FUNC key with numerical data displayed returns to the display of the function code corresponding to the numerical data without updating the data, even if it has been changed on display.

Down to the

minimum limit

*1 The content of the display varies depending on the parameter type.

*2 To update numerical data, be sure to press the STR key after changing the data.

3 - 6