Hitachi SJ700-2 instruction manual Pressing the STR key

Chapter 3 Operation

(3)Code/data display and key operation in extended function mode U

The extended function mode U differs in operation from other extended function modes because the extended function mode U is used to register (or automatically record) other extended-function codes as user-specified U parameters.

Key operation and

transition of codes on display (in monitor or function mode)

Key operation and

transition of codes on display (in extended function mode U)

Key operation and transition of codes on display (when displaying extended-function mode parameters from the extended function mode U)

Key operation and

transition of codes on

display (in monitor,

function, or extended

*1 The content of the display varies depending on the parameter type.

*2 To update numerical data, be sure to press the STR key after changing the data.

Extended function mode U

FUNC

FUNC

FUNC or STR

FUNC

	Pressing the STR key
You cannot restore the	stores the value set here
display with the	in the corresponding U
key.	parameter.
STR

(*1) (*2) (Data display)

Extended function mode A

FUNC

FUNC or STR

Extended function mode B

Pressing the STR key reflects the value set here in the corresponding parameter. Note that the value is not reflected in the corresponding U parameter.

Extended function mode C

Extended function mode H

Extended function mode P

(Display with the factory setting)

Monitor mode

Function mode

3 - 8