Hitachi SJ700-2 instruction manual EXT external trip, 13 USP unattended start

Chapter 4 Explanation of Functions

Register	Function name	Function	R/W	Monitoring and setting items Data resolution	Register
No.		code			No.
				1 (RV: Reverse RUN), 2 (CF1: Multispeed 1 setting), 3
				(CF2: Multispeed 2 setting), 4 (CF3: Multispeed 3 setting),
1401h	Terminal [1] function	C001	R/W	5 (CF4: Multispeed 4 setting), 6 (JG: Jogging), 7 (DB:	-
				external DC braking), 8 (SET: Set 2nd motor data), 9 (2CH:
				2-stage acceleration/deceleration), 11 (FRS: free-run stop),
				12 (EXT: external trip), 13 (USP: unattended start
				protection), 14: (CS: commercial power source enable), 15
1402h	Terminal [2] function	C002	R/W	(SFT: software lock), 16 (AT: analog input voltage/current	-
				select), 17 (SET3: 3rd motor control), 18 (RS: reset), 20
				(STA: starting by 3-wire input), 21 (STP: stopping by 3-wire
				input), 22 (F/R: forward/reverse switching by 3-wire input),
				23 (PID: PID disable), 24 (PIDC: PID reset), 26 (CAS:
1403h	Terminal [3] function	C003	R/W	control gain setting), 27 (UP: remote control UP function),	-
				28 (DWN: remote control DOWN function), 29 (DWN:
				remote control data clearing), 31 (OPE: forcible operation),
				32 (SF1: multispeed bit 1), 33 (SF2: multispeed bit 2), 34
				(SF3: multispeed bit 3), 35 (SF4: multispeed bit 4), 36
1404h	Terminal [4] function	C004	R/W	(SF5: multispeed bit 5), 37 (SF6: multispeed bit 6), 38	-
				(SF7: multispeed bit 7), 39 (OLR: overload restriction
				selection), 40 (TL: torque limit enable), 41 (TRQ1: torque
				limit selection bit 1), 42 (TRQ2: torque limit selection bit 2),
				43 (PPI: P/PI mode selection), 44 (BOK: braking
				confirmation), 45 (ORT: orientation), 46 (LAC: LAD
1405h	Terminal [5] function	C005	R/W	cancellation), 47 (PCLR: clearance of position deviation),	-
				48 (STAT: pulse train position command input enable), 50
				(ADD: trigger for frequency addition [A145]), 51 (F-TM:
				forcible-terminal operation), 52 (ATR: permission of torque
				command input), 53 (KHC: cumulative power clearance),
1406h	Terminal [6] function	C006	R/W	54 (SON: servo-on), 55 (FOC: forcing), 56 (MI1:	-
				general-purpose input 1), 57 (MI2: general-purpose input
				2), 58 (MI3: general-purpose input 3), 59 (MI4:
				general-purpose input 4), 60 (MI5: general-purpose input
				5), 61 (MI6: general-purpose input 6), 62 (MI7:
1407h	Terminal [7] function	C007	R/W	general-purpose input 7), 63 (MI8: general-purpose input	-
				8), 65 (AHD: analog command holding), 66 (CP1:
				multistage position settings selection 1 ), 67 (CP2:
				multistage position settings selection 2), 68 (CP3:
				multistage position settings selection 3), 69 (ORL:
				Zero-return limit function), 70 (ORG: Zero-return trigger
1408h	Terminal [8] function	C008	R/W	function), 71 (FOT: forward drive stop), 72 (ROT: reverse	-
				drive stop), 73 (SPD: speed / position switching), 74
				(PCNT: pulse counter), 75 (PCC: pulse counter clear)
				255 (no: no assignment)
1409h	(Reserved)	-	-	Inaccessible	-
140Ah	(Reserved)	-	-	Inaccessible	-
140Bh	Terminal [1] active state	C011	R/W	0 (NO), 1 (NC)	-
140Ch	Terminal [2] active state	C012	R/W	0 (NO), 1 (NC)	-
140Dh	Terminal [3] active state	C013	R/W	0 (NO), 1 (NC)	-
140Eh	Terminal [4] active state	C014	R/W	0 (NO), 1 (NC)	-
140Fh	Terminal [5] active state	C015	R/W	0 (NO), 1 (NC)	-
1410h	Terminal [6] active state	C016	R/W	0 (NO), 1 (NC)	-
1411h	Terminal [7] active state	C017	R/W	0 (NO), 1 (NC)	-
1412h	Terminal [8] active state	C018	R/W	0 (NO), 1 (NC)	-
1413h	Terminal [FW] active state	C019	R/W	0 (NO), 1 (NC)	-
1414h	(Reserved)	-	-	Inaccessible	-

4 - 152