Hitachi SJ700-2 instruction manual Analog

Chapter 8 List of Data Settings

					Default			Setting	Change
								during	during
	Code	Function name	Monitored data or setting					operation	operation	Page
				_FF		_FEF	_FUF	(allowed	(allowed
								or not)	or not)
	C021	Terminal [11] function	00 (RUN: running), 01 (FA1: constant-speed reached), 02 (FA2: set		01			¯	{
			frequency overreached), 03 (OL: overload notice advance signal (1)), 04
	C022	Terminal [12] function			00			¯	{
			(OD: output deviation for PID control), 05 (AL: alarm signal), 06 (FA3: set
	C023	Terminal [13] function			03
			frequency reached), 07 (OTQ: over-torque), 08 (IP: instantaneous power					¯	{
	C024	Terminal [14] function	failure), 09 (UV: undervoltage), 10 (TRQ: torque limited), 11 (RNT:		07			¯	{
			operation time over), 12 (ONT: plug-in time over), 13 (THM: thermal alarm
	C025	Terminal [15] function			40
			signal), 19 (BRK: brake release), 20 (BER: braking error), 21 (ZS: 0 Hz					¯	{
			detection signal), 22 (DSE: speed deviation maximum), 23 (POK:
terminals			positioning completed), 24 (FA4: set frequency overreached 2), 25 (FA5:
			set frequency reached 2), 26 (OL2: overload notice advance signal (2)), 27
			(Odc: Analog O disconnection detection), 28 (OIDc: Analog OI
			disconnection detection), 29 (O2Dc: Analog O2 disconnection detection),
output			31 (FBV: PID feedback comparison), 32 (NDc: communication line
			disconnection), 33 (LOG1: logical operation result 1), 34 (LOG2: logical							4-60
			operation result 2), 35 (LOG3: logical operation result 3), 36 (LOG4: logical
Intelligent			operation result 4), 37 (LOG5: logical operation result 5), 38 (LOG6: logical
			warning), 43 (LOC: low-current indication signal), 44 (M01:
			operation result 6), 39 (WAC: capacitor life warning), 40 (WAF: cooling-fan
	C026	Alarm relay terminal function	speed drop), 41 (FR: starting contact signal), 42 (OHF: heat sink overheat		05			¯	{
			general-purpose output 1), 45 (M02: general-purpose output 2), 46 (M03:
			general-purpose output 3), 47 (M04: general-purpose output 4), 48 (M05:
			general-purpose output 5), 49 (M06: general-purpose output 6), 50 (IRDY:
			inverter ready), 51 (FWR: forward rotation), 52 (RVR: reverse rotation), 53
			(MJA: major failure), 54(WCO: window comparator O), 55(WCOI: window
			comparator OI), 56 (WCO2: window comparator O2)
			(When alarm code output is selected for "C062", functions "AC0" to "AC2"
			or "AC0" to "AC3" [ACn: alarm code output] are forcibly assigned to
			intelligent output terminals 11 to 13 or 11 to 14, respectively.)
			00 (output frequency), 01 (output current), 02 (output torque), 03 (digital
			output frequency), 04 (output voltage), 05 (input power), 06 (electronic
	C027	[FM] siginal selection	thermal overload), 07 (LAD frequency), 08 (digital current monitoring), 09		00			¯	{	4-73
			(motor temperature), 10 (heat sink temperature), 12 (general-purpose
monitoring			output YA0)
			00 (output frequency), 01 (output current), 02 (output torque), 04 (output
	C028	[AM] siginal selection	voltage), 05 (input power), 06 (electronic thermal overload), 07 (LAD		00			¯	{
			frequency), 09 (motor temperature), 10 (heat sink temperature), 11 (output
Analog			torque [signed value]), 13 (general-purpose output YA1)							4-74
			00 (output frequency), 01 (output current), 02 (output torque), 04 (output
	C029	[AMI] siginal selection	voltage), 05 (input power), 06 (electronic thermal overload), 07 (LAD		00			¯	{
			frequency), 09 (motor temperature), 10 (heat sink temperature), 14
			(general-purpose output YA2)
	C030	Digital current monitor reference	0.20 x "rated current" to 2.00 x "rated current" (A)	Rated current of inverter				{	{	4-73
		value	(Current with digital current monitor output at 1,440 Hz)
Intelligentoutput terminals	C031	Terminal [11] active state	00 (NO) / 01 (NC)		00			¯	{
	C032	Terminal [12] active state	00 (NO) / 01 (NC)		00			¯	{
	C033	Terminal [13] active state	00 (NO) / 01 (NC)		00			¯	{	4-61
	C034	Terminal [14] active state	00 (NO) / 01 (NC)		00			¯	{
	C035	Terminal [15] active state	00 (NO) / 01 (NC)		00			¯	{
	C036	Alarm relay active state	00 (NO) / 01 (NC)		01			¯	{

8 - 10