Hitachi SJ700-2 instruction manual Monitoring and setting items Data resolution Register

Chapter 4 Explanation of Functions

Register	Function name	Function	R/W	Monitoring and setting items Data resolution	Register
No.		code			No.
1326h	Reduced voltage start selection	b036	R/W	0 (minimum reduced voltage start time) to 255	-
				(maximum reduced voltage start time)
1327h	Function code display restriction	b037	R/W	0 (full display), 1 (function-specific display), 2 (user	-
				setting), 3 (data comparison display), 4 (basicdisplay)
1328h	Initial-screen selection	b038	R/W	0 (screen displayed when the STR key was pressed	-
				last), 1 (d001), 2 (d002), 3 (d003), 4 (d007), 5 (F001)
1329h	Automatic user-parameter	b039	R/W	0 (disabling), 1 (enabling)	-
	setting function enable
132Ah	Torque limit selection	b040	R/W	00 (quadrant-specific setting), 01 (switching by	-
				terminal), 02 (analog input), 03 (option 1),
				04 (option 2)
132Bh	Torque limit (1) (forward-driving	b041	R/W	0 to 200/255 (no)	1 [%]
	in 4-quadrant mode)
132Ch	Torque limit (2)	b042	R/W	0 to 200/255 (no)	1 [%]
	(reverse-regenerating in
	4-quadrant mode)
132Dh	Torque limit (3) (reverse-driving	b043	R/W	0 to 200/255 (no)	1 [%]
	in 4-quadrant mode)
	Torque limit (4)
132Eh	(forward-regenerating in	b044	R/W	0 to 200/255 (no)	1 [%]
	4-quadrant mode)
132Fh	Torque limit LADSTOP enable	b045	R/W	0 (disabling), 1 (enabling)	-
1330h	Reverse Run protection enable	b046	R/W	0 (disabling), 1 (enabling)	-
1331h to	(Reserved)	-	-	Inaccessible	-
1333h
	Controller deceleration and stop			0 (disabling), 1 (enabling), 2, (nonstop operation at
1334h		b050	R/W	momentary power failure (no restoration))	-
	on power loss			3, (nonstop operation at momentary power failure
				(restoration to be done))
1335h	DC bus voltage trigger level	b051	R/W	0 to 10000	0.1 [V]
	during power loss
1336h	Over-voltage threshold during	b052	R/W	0 to 10000	0.1 [V]
	power loss
1337h	Deceleration time setting during	b053 (high)	R/W	0 to 360000	0.01
1338h	power loss (target voltage level)	b053 (low)	R/W		[sec.]
1339h	Initial output frequency decrease	b054	R/W	0 to 1000	0.01 [Hz]
	during power loss
133Ah	Proportional gain setting for	b055	R/W	0 to 255	0.01
	nonstop operation at momentary
	power failure
	Integral time setting for nonstop				0.001
133Bh	operation at momentary power	b056	R/W	0 to 65535
					[sec]
	failure
133Ch to	(Reserved)	-	-	Inaccessible	-
133Eh
133Fh	Maximum-limit level of window	b060	R/W
	comparators O
1340h	Minimum-limit level of window	b061	R/W
	comparators O
1341h	Hysteresis width of window	b062	R/W
	comparators O
1342h	Maximum-limit level of window	b063	R/W
	comparators OI
1343h	Minimum-limit level of window	b064	R/W
	comparators OI
1344h	Hysteresis width of window	b065	R/W
	comparators OI
1345h	Maximum-limit level of window	b066	R/W
	comparators OI
1346h	Minimum-limit level of window	b067	R/W
	comparators O/OI/O2
1347h	Hysteresis width of window	b068	R/W
	comparators O/OI/O2
1348h	(Reserved)	-	-	Inaccessible	-
1349h	Operation level at O	b070	R/W
	disconnection
134Ah	Operation level at OI	b071	R/W
	disconnection
134Bh	Operation level at O2	b072	R/W
	disconnection
134Ch to	(reserved)	-	-	Inaccessible
1350
1351h	Cumulative input power data	b060	R/W	Clearance by setting "1"	-
	clearance
1352h	Cumulative input power display	b060	R/W	1 to 1000	1
	gain setting

4 - 150