Hitachi SJ700-2 instruction manual Thermal overload, 07 LAD frequency, 09 motor

				Chapter 4 Explanation of Functions
Register	Function name	Function	R/W	Monitoring and setting items Data resolution	Register
No.		code			No.
				0 (RUN: running), 1 (FA1: constant-speed reached), 2 (FA2:
				set frequency overreached), 3 (OL: overload notice advance
1415h	Terminal [11] function	C021	R/W	signal (1)), 4 (OD: output deviation for PID control), 5 (AL:	-
				alarm signal), 6 (FA3: set frequency reached), 7 (OTQ:
				over-torque), 8 (IP: instantaneous power failure), 9 (UV:
				undervoltage), 10 (TRQ: torque limited), 11 (RNT: operation
				time over), 12 (ONT: plug-in time over), 13 (THM: thermal
1416h	Terminal [12] function	C022	R/W	alarm signal), 19 (BRK: brake release), 20 (BER: braking	-
				error), 21 (ZS: 0 Hz detection signal), 22 (DSE: speed
				deviation maximum), 23 (POK: positioning completed), 24
				(FA4: set frequency overreached 2), 25 (FA5: set frequency
				reached 2), 26 (OL2: overload notice advance signal (2)), 31
1417h	Terminal [13] function	C023	R/W	(FBV: PID feedback comparison), 32 (NDc: communication	-
				line disconnection), 33 (LOG1: logical operation result 1), 34
				(LOG2: logical operation result 2), 35 (LOG3: logical
				operation result 3), 36 (LOG4: logical operation result 4), 37
				(LOG5: logical operation result 5), 38 (LOG6: logical
				operation result 6), 39 (WAC: capacitor life warning), 40
1418h	Terminal [14] function	C024	R/W	(WAF: cooling-fan speed drop), 41 (FR: starting contact	-
				signal), 42 (OHF: heat sink overheat warning), 43 (LOC:
				low-current indication signal), 44 (M01: general-purpose
				output 1), 45 (M02: general-purpose output 2), 46 (M03:
				general-purpose output 3), 47 (M04: general-purpose output
1419h	Terminal [15] function	C025	R/W	4), 48 (M05: general-purpose output 5), 49 (M06:	-
				general-purpose output 6), 50 (IRDY: inverter ready), 51
				(FWR: forward rotation), 52 (RVR: reverse rotation), 53
				(MJA: major failur)
				54 (WCO: window comparator O), 55 (WCO: window
				comparator OI), 56 (WCO: window comparator O2)
141Ah	Alarm relay terminal function	C026	R/W	(When alarm code output is selected by "C062", functions	-
				"AC0" to "AC2" or "AC0" to "AC3" [ACn: alarm code output]
				are forcibly assigned to intelligent output terminals [11] to
				[13] or [11] to [14], respectively.)
				0 (output frequency), 1 (output current), 2 (output torque), 3
141Bh	[FM] siginal selection	C027	R/W	(digital output frequency), 4 (output voltage), 5 (input power),
				6 (electronic thermal overload), 7 (LAD frequency), 8 (digital	-
				current monitoring), 9 (motor temperature), 10 (heat sink
				temperature), 12 (general-purpose output YA0)
				0 (output frequency), 1 (output current), 2 (output torque), 4
141Ch	[AM] siginal selection	C028	R/W	(output voltage), 5 (input power), 6 (electronic thermal
				overload), 7 (LAD frequency), 9 (motor temperature), 10	-
				(heat sink temperature), 11 (output torque [signed value]), 13
				(general-purpose output YA1)
				00 (output frequency), 01 (output current), 02 (output
141Dh	[AMI] siginal selection	C029	R/W	torque), 04 (output voltage), 05 (input power), 06 (electronic	-
				thermal overload), 07 (LAD frequency), 09 (motor
				temperature), 10 (heat sink temperature), 14
				(general-purpose output YA2)
141Eh	Digital current monitor	C030	R/W	200 to 2000	0.1 [%]
	reference value
141Fh	Terminal [11] active state	C031	R/W	0 (NO), 1 (NC)	-
1420h	Terminal [12] active state	C032	R/W	0 (NO), 1 (NC)	-
1421h	Terminal [13] active state	C033	R/W	0 (NO), 1 (NC)	-
1422h	Terminal [14] active state	C034	R/W	0 (NO), 1 (NC)	-
1423h	Terminal [15] active state	C035	R/W	0 (NO), 1 (NC)	-
1424h	Alarm relay active state	C036	R/W	0 (NO), 1 (NC)	-
1425h	(Reserved)	-	-	Inaccessible	-
1426h	Low-current indication signal	C038	R/W	0 (output during acceleration/deceleration and	-
				constant-speed operation), 1 (output only during
	output mode selection
				constant-speed operation)
1427h	Low-current indication signal	C039	R/W	0 to 2000	0.1 [%]
	detection level
				00 (output during acceleration/deceleration and
1428h	Overload signal output mode	C040	R/W	constant-speed operation), 01 (output only during	-
				constant-speed operation)
1429h	Overload level setting	C041	R/W	0 to 2000	0.1 [%]

4 - 153