Hitachi SJ700-2 instruction manual C042 high

Chapter 4 Explanation of Functions

Register	Function name	Function code	R/W	Monitoring and setting items Data resolution	Register
No.					No.
142Ah	Frequency arrival setting for accel.	C042 (high)	R/W	0 to 40000	0.01 [Hz]
142Bh		C042 (low)	R/W
142Ch	Frequency arrival setting for decel.	C043 (high)	R/W	0 to 40000	0.01 [Hz]
142Dh		C043 (low)	R/W
142Eh	PID deviation level setting	C044	R/W	0 to 1000	0.1 [%]
142Fh	Frequency arrival setting for	C045 (high)	R/W	0 to 40000	0.01 [Hz]
1430h	acceleration (2)	C045 (low)	R/W
1431h	Frequency arrival setting for	C046 (high)	R/W	0 to 40000	0.01 [Hz]
1432h	deceleration (2)	C046 (low)	R/W
1433h to	(Reserved)	-	-	Inaccessible	-
1437h
1438h	Maximum PID feedback data	C052	R/W	0 to 1000	0.1 [%]
1439h	Minimum PID feedback data	C053	R/W	0 to 1000	0.1 [%]
143Ah	(Reserved)		R/W		-
143Bh	Over-torque (forward-driving) level	C055	R/W	0 to 200	1 [%]
	setting
143Ch	Over-torque (reverse regenerating)	C056	R/W	0 to 200	1 [%]
	level setting
143Dh	Over-torque (reverse driving) level	C057	R/W	0 to 200	1 [%]
	setting
143Eh	Over-torque (forward regenerating)	C058	R/W	0 to 200	1 [%]
	level setting
143Fh	(Reserved)	-	-	Inaccessible	-
1440h	(Reserved)	-	-	Inaccessible	-
1441h	Electronic thermal warning level	C061	R/W	0 to 100	1 [%]
	setting
1442h	Alarm code output	C062	R/W	0 (disabling alarm output), 1 (3 bits), 2 (4 bits)	-
1443h	Zero speed detection level	C063	R/W	0 to 10000	0.01 [Hz]
1444h	Heat sink overheat warning level	C064	R/W	0 to 200	1 [℃]
1445h to	(Reserved)	-	-	Inaccessible	-
144Ah
144Bh	Communication speed selection	C071	R/W	2 (loopback test), 3 (2,400 bps), 4 (4,800 bps), 5	-
				(9,600 bps), 6 (19,200 bps)
144Ch	Node allocation	C072	R/W	1. to 32.	-
144Dh	Communication data length	C073	R/W	7 (7 bits), 8 (8 bits)	-
	selection
144Eh	Communication parity selection	C074	R/W	00 (no parity), 01 (even parity), 02 (odd parity)	-
144Fh	Communication stop bit selection	C075	R/W	1 (1 bit), 2 (2 bits)	-
				0 (tripping), 1 (tripping after decelerating and
1450h	Selection of the operation after	C076	R/W	stopping the motor), 2 (ignoring errors), 3	-
	communication error			(stopping the motor after free-running), 4
				(decelerating and stopping the motor)
1451h	Communication timeout limit	C077	R/W	0 to 9999	0.01 [sec.]
1452h	Communication wait time	C078	R/W	0 to 1000	1 [msec.]
1453h	Communication mode selection	C079	R/W	0 (ASCII), 1 (Modbus-RTU)	-
1454h	(Reserved)	-	-	Inaccessible	-
1455h	[O] input span calibration	C081	R/W	0 to 65530	1
1456h	[OI] input span calibration	C082	R/W	0 to 65530	1
1457h	[O2] input span calibration	C083	R/W	0 to 65530	1
1458h	(Reserved)	-	-	Inaccessible	-
1459h	Thermistor input tuning	C085	R/W	0 to 10000	0.1
145Ah to	(Reserved)	-	-	Inaccessible	-
145Eh
145Fh	Debug mode enable	C091	R	0/1	-
1460h to	(Reserved)	-	-	Inaccessible	-
1468h
1469h	Up/Down memory mode selection	C101	R/W	0 (not storing the frequency data), 1 (storing the	-
				frequency data)
				0 (resetting the trip when RS is on), 1 (resetting
146Ah	Reset mode selection	C102	R/W	the trip when RS is off), 2 (enabling resetting only	-
				upon tripping [resetting when RS is on])
				0 (starting with 0 Hz), 1 (starting with matching
146Bh	Restart mode after reset	C103	R/W	frequency), 2 (restarting with active matching	-
				frequency)
146Ch	(Reserved)	-	-	Inaccessible	-
146Dh	FM gain adjustment	C105	R/W	50 to 200	1 [%]
146Eh	AM gain adjustment	C106	R/W	50 to 200	1 [%]
146Fh	AMI gain adjustment	C107	R/W	50 to 200	1 [%]

4 - 154