DSL/Cable Router User Guide
26
Figure 15: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this method is recommended. By default, the
DSL/Cable Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the DSL/Cable Router.
Specify an IP Address
If your PC is already configured, check with your network administrato r before making the
following changes.
1. The Default Gateway must be set to the IP address of the DSL/Cable Router. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the
DSL/Cable Router's IP address, as shown in Figure 16 below.
• If necessary, use the Up button to make the DSL/Cable Router the first entry in the
Gateways list.