Sony ST-SE370, ST-SE570 Naming the preset, stations, Organizing the preset, stations, ENTER, continued, 1 Press MENU, 4 Press ENTER, 5 Press MEMORY, Press CHARACTER

Press CHARACTER.

The cursor flashes in the display.

Naming the preset

stations

You can assign a name up to 5 characters long to each preset station except FM RDS stations. When the station is tuned in, the station name will appear instead of the frequency.

1

2 Turn TUNING/SELECT to select a character.

3 When the character you want appears, press CHARACTER to move the cursor into position for the next character.

If you make a mistake

Press CHARACTER repeatedly until the character you want to change flashes (every time you press CHARACTER, the next character flashes). Then turn TUNING/ SELECT to select a new character.

4 Repeat steps 2 and 3 until the station name you want appears in the display.5 Press MEMORY.

“MEMORY” appears along with the lowest vacant code to indicate that the tuner is ready to store the station.

6 Press SHIFT and one of the preset buttons to specify the preset where you want to store the station name.

Note

The display returns to normal display mode if you stop assigning names for more than 8 seconds. If this happens, start again from the beginning.

Tip

To see the frequency of the displayed station name, press DISPLAY repeatedly.

Organizing the preset

stations

This tuner makes it easy to arrange preset stations in the order you prefer. You can arrange all the preset stations automatically, according to alphabetical order, signal strength, country code, or tuner band, or you can use the Move and Erase functions to move and erase specific preset stations.

1 Press MENU.2 Turn TUNING/SELECT until “Edit” appears in the display and pressENTER.

If no stations have been stored as presets, “No Preset” appears in the display.

3 Turn TUNING/SELECT to select one of the following sorting methods:

Select	To
Move	Change the location of a specific
	preset (see page 12).
Erase	Erase a specific preset (see page 12).
Alphabet	Sort preset stations in alphabetical
	order according to their preset names.
	Stations without preset names are
	arranged by frequency, from low to
	high.
Strength	Sort preset stations in order of their
	signal strength (FM stations only).
	AM (MW and LW) stations are
	arranged by frequency.
Country*	Sort FM RDS stations with PI**
	information alphabetically by
	country. Other stations are arranged
	by frequency.
Band	Sort preset stations in order of their
	frequency band (FM - AM (MW -
	LW)).

*European model only.

**Programme Identification (See page 13).

4 Press ENTER.

The tuner sorts the stations, then returns to normal tuning mode and receives preset station A1.

Note

Some countries use the same country code, and the stations from these counties may be arranged together.

continued

Operations Tuner Advanced

11