Connect the mains lead to a wall outlet after completing all of the previous connections.
ANTENNA |
|
| |
| OUTPUT | EON CONTROL | |
FM | AM |
|
|
| R | L | OUT |
75Ω COAXIAL | y |
|
|
To a wall outlet
Selecting the German
display
You can select either an English or a German language display. The factory preset language is English. To change the display to German, follow the steps below.
1 Press POWER to turn off the tuner.2 While pressing down the numeric button 2, press POWER to turn on the tuner.“Deutsch” appears in the display.
To return to the English displayRepeat this procedure.
“English” appears in the display.
Storing FM stations automatically (Auto-betical Select)
(European model only)With
“Yes” and “No” appear in the display.
4 Turn TUNING/SELECT to select “Yes”.5 Press AUTO BETICAL SELECT again.The tuner scans and stores all the FM and FM RDS stations in the broadcast area.
For RDS stations, the tuner first checks for stations broadcasting the same programme, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Programme Service name, then assigned a
Regular FM stations are assigned two- character preset codes and stored after the RDS stations.
Tip
To change the location of, or erase, a preset station, see “Organizing the preset stations” on page 11.
Notes
•If you move to another area, repeat this procedure to store stations in your new area.
•For details on tuning stored stations, see page 8.
•The FM MODE setting is also stored along with the station.
•If you move the antenna after storing stations using
7