Hooking up the system (continued)
Tip
For stations that are difficult to receive, try repositioning the loop antenna while tuning. Placing the supplied AM loop antenna near a window will help improve reception quality.
FM antenna hookups
With an FM outdoor antenna, you can obtain a higher FM broadcast sound quality. We recommend that you use the supplied FM wire antenna only temporarily until you install an FM outdoor antenna. For the specific location of the FM ANTENNA terminal, see the illustration below.
FM ANTENNA
ANTENNA |
|
| |
| OUTPUT | EON CONTROL | |
FM | AM |
|
|
| R | L | OUT |
75Ω COAXIAL | y |
|
|
What will I need?
•FM wire antenna (supplied) (1)
•FM outdoor antenna (not supplied) (1) and
IEC female type connector
Connect the supplied FM wire antenna or an FM outdoor antenna (not supplied) to one of the FM terminals on the back of this unit.
FM wire antenna
ANTENNA
FMAM
75Ω COAXIAL | y |
FM outdoor antenna
ANTENNA
FMAM
75Ω COAXIAL | y |
IEC female type connector
Connecting a ground wire
If you connect an outdoor antenna, be sure to connect a earth lead (not supplied) to the AM ANTENNA U terminal (in addition to the AM loop antenna) for lightning protection.
Amplifier hookups
Connect the tuner to an amplifier. Be sure to turn off both components before connection. For the specific location of the terminals, see the illustration below.
OUTPUT
ANTENNA |
|
| |
| OUTPUT | EON CONTROL | |
FM | AM |
|
|
| R | L | OUT |
75Ω COAXIAL | y |
|
|
EON CONTROL
What cables will I need?
• Audio cord (supplied) (1)
White (L) | White (L) |
Red (R) | Red (R) |
Connect the white plugs to the white (L) jacks and the red plugs to the red (R) jacks. Insert the plugs completely into the jacks; incomplete connections may cause noise.
TunerAmplifier
OUTPUT | TUNER IN | ||
R | L | R | L |
|
| ||
|
|
|
|
l
Tip
If you have a Sony amplifier equipped with an EON CONTROL IN terminal, use the supplied EON connecting cord to connect the EON CONTROL OUT terminal on the tuner to the EON CONTROL IN terminal on your amplifier. This lets you use the EON function (see page 13) when listening to other components.
TunerAmplifier
EON CONTROL | EON CONTROL |
OUT | IN |
l
6