Initial setting: OFF
Select “ON” to activate the equalizer.
Note
You cannot adjust the equalizer when the system is decoding PCM 96 kHz signals, or when DTS 96/24, DTS-ES Matrix or DTS Neo:6 decoding is applied.
EQ menu parameters
While monitoring the sound, rotate –/+ to adjust the selected parameter.
4
5 Repeat steps 3 and 4 to adjust the other items.
Press MAIN MENU repeatedly to select “EQ”.
Rotate MENU to select the parameter. For details, see “EQ menu parameters”
Start playing a source encoded with multi channel surround effects (DVD, etc.).
Frequency
(Hz)
below.
2
3
1
Level (dB)
x MENU (Menu expanding)
• MENU EXP.
The advanced parameters for the SP SETUP and LEVEL menus are displayed and can be adjusted. For details on each setup item, see pages 20, 36 and the following pages.
• MENU STD
The advanced parameters are not displayed.
The initial setting is underlined.
CUSTOMIZE menu parameters
3 Rotate –/+ to adjust the selected parameter.
4 Repeat steps 2 and 3 to adjust the other items.
“CUSTOM”.
Rotate MENU to select the parameter.
Press MAIN MENU repeatedly to select
1
2
the CUSTOMIZE menu.
Advanced settings
Using the CUSTOMIZE menu to adjust the receiver
You can adjust various receiver settings using

Adjusting the equalizer

You can adjust the tonal quality (bass, treble level) of each speaker using the EQ menu.

BassTreble

Frequency

(Hz)

xEQ

x L R BASS XXX.X dB (Front speaker bass level)

x L R TREB. XXX.X dB (Front speaker treble level)

Initial setting: 0 dB

You can adjust from –10 dB to +10 dB in 1 dB steps.

x96 XXXX DTS (DTS 96/24 decoding mode)

•96 AUTO

When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies.

•96 OFF

Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies.

Notes

•This parameter is valid only in the A.F.D. mode (page 31). In other sound fields, this parameter is always set to “96 OFF”.

•DTS 96/24 decoding is only valid in the A.F.D. mode (page 31). When the system is set to other sound fields, standard 48 kHz decoding is used.

•Even when a DTS 96/24 signal is input, standard 48 kHz decoding is used if any speakers are set to “SMALL” or if the sub woofer is set to “NO”.

38GB