xSB XXXX
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the surround back decoding mode (page 34).
For details on each decoding mode, see page 35.
•SB AUTO
•SB MTRX
•SB OFF
Note
This parameter is valid only in the A.F.D. mode (page 31).
xS.F XXXX (Sound field link)
•S.F LINK
Lets you apply the last selected sound field to an input whenever it is selected. For example, if you select HALL for the CD/SACD input, then change to a different input and return to CD/SACD, HALL will automatically be applied again.
•S.F FIX
Sound field link is not activated.
xDEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 3 and TV/SAT, and “DEC. PCM” for DVD and MD/TAPE.
•DEC. AUTO
Automatically switches the input mode between DTS, Dolby Digital, or PCM.
•DEC. PCM
PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode
xD.PWR. XXXX
(Digital power management)
•D.PWR. OFF
Lets you turn off the power of the unnecessary digital circuits automatically when outputting the analog audio signals using the ANALOG DIRECT or MULTI CH IN function. You can enjoy high quality analog audio without the influence of digital circuits.
•D.PWR. ON
Lets you keep the power of digital circuits on. Select if you do not like the time lag that occurs with the “D.PWR. OFF” setting.
xPWR.S. XXX
(CONTROL A1: Power link)
•PWR.S. ON
The power link function is not activated, but you can decrease the power consumption of the receiver during standby mode.
•PWR.S. OFF
Lets you turn on the system automatically when the component connected via CONTROL A1 cords (page 45) is turned on.
x |
| |
| ||
(Coaxial Input Assignment) | Advanced | |
• DVD | ||
| ||
Lets you assign the COAXIAL input jack to DVD |
| |
input. |
| |
• CD | Adjustments | |
Lets you assign the COAXIAL input jack to CD/ | ||
| ||
SACD input. |
| |
x [DIMMER] |
| |
Lets you adjust the brightness of the display. |
| |
x NAME IN | and | |
(Naming preset stations and inputs) | ||
| ||
Lets you set the name of preset stations and inputs | Settings | |
selected with INPUT SELECTOR. For details, see | ||
| ||
|
When “MENU” is set to “MENU EXP.”, all of the following parameters are displayed and adjustable.
See page 20 for the SP SETUP menu adjustments. Initial settings are underlined.
continued