xCTR XXX.X dB (Center speaker level)
xSUR.L. XXX.X dB (Surround speaker (L) level)
xSUR.R. XXX.X dB (Surround speaker (R) level)
xSB XXX.X dB
(Surround back speaker level)*
xSBL XXX.X dB (Surround back (L) level)**
xSBR XXX.X dB (Surround back (R) level)**
xS.W. XXX dB
(Sub woofer level)
Initial setting: 0 dB
You can adjust from
x
MULTI CH IN
SW. XXX dB
(Multi channel sub woofer level)
Initial setting: 0 dB
Lets you increase the level of the MULTI CH IN sub woofer channel by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CH IN jacks. The sub woofer level from DVD players is 10 dB lower than Super Audio CD players.
*Only when the surround back speaker is set to “SINGLE”
**Only when the surround back speaker is set to “DUAL” in the SP SETUP menu
xEFCT. XXX (Effect level)
Initial setting: STD
Lets you adjust the size of the surround effect.
Note
When one of the following sound fields are selected, no sound is output from the sub woofer if all the speakers are set to “LARGE” in the SP SETUP menu. However, the sound will be output from the sub woofer if the digital input signal contains LFE (Low Frequency Effect) signals, or if the front, center, or surround speakers are set to “SMALL”.
–HALL
–JAZZ CLUB
–LIVE CONCERT
For advanced LEVEL menu adjustmentsUse the CUSTOMIZE menu and set “MENU” to “MENU EXP.” to enable advanced adjustments.
For details on “MENU”, see page 38. For details on how to set the items, see page 41.
Resetting sound fields to the initial settings1 Press ?/1 to turn off the power.2 While holding down MUSIC, press?/1.
“S.F CLR.” appears in the display and all sound fields are reset to the initial setting.