Amplifier/Tuner Operation
Selecting the component1 Rotate FUNCTION to select the function.
The selected function appears in the display.
To select the | Display |
VCR | VIDEO 1 or VIDEO 2 |
|
|
Camcorder or | VIDEO 3 |
TV game |
|
|
|
DVD or LD player | DVD/LD |
|
|
Satellite tuner | TV/SAT |
|
|
Tape deck | TAPE |
|
|
MD or DAT deck | MD/DAT |
|
|
CD or Super Audio | CD/SACD |
CD player |
|
|
|
Built in tuner | TUNER |
|
|
Turntable | PHONO |
|
|
2 Turn on the component and start playback.
When you select a component which is also connected to the TV (such as VCR or DVD player), turn on the TV and set the TV’s video input to match the component you selected.
If your TV is connected to the receiver’s MONITOR jack, the video from the selected function will be displayed on the TV.
3 Rotate MASTER VOLUME to adjust the volume.
To mute the sound
Press MUTING.
Notes on using headphones
•When headphones are connected, you can select only the following sound fields (page 37).
–HEADPHONE (2CH)
–HEADPHONE (DIRECT)
–HEADPHONE (MULTI1)
–HEADPHONE (MULTI2)
–HEADPHONE THEATER
•When headphones are connected and you use the MULTI CH DIRECT function with center speaker (CENTER SP) set to “NO” or “MIX”, and sub woofer (SUB WOOFER) set to “NO”, only the front L/R signals of the multi channel sound are output from the headphones.
To listen to the sound of all channels, press one of the other sound field buttons to cancel the MULTI CH DIRECT function.