Other Operations
Naming preset stationsand functionsYou can enter a name of up to 8 characters for preset stations and functions and display it in the receiver’s display.
1 To index a preset station
Rotate FUNCTION to select TUNER, then tune in the preset station you want to create an index name for (page 28).
To index a function
Rotate FUNCTION to select a function you want to create an index name for.
2 Press CUSTOMIZE.
The CUSTOMIZE menu appears in the display.
3 Press the cursor button ( ) to select “NAME IN?”.
The preset station name or the function name flashes.
4 Press ENTER.
The cursor flashes and you can select a character.
5 Create an index name by using the jog dial and cursor buttons ( or ).
Turn the jog dial to select a character, then press the cursor button ( ) to move the cursor to the next position.
Tips
•You can select the character type as follows by turning the jog dial.
Alphabet (upper case) t Alphabet (lower case) t Numbers t Symbols
•To enter a blank space, turn the jog dial until a blank space appears in the display.
•If you made a mistake, press the cursor button
( or ) until the character you want to change flashes, then turn the jog dial to select the correct character.
6 Press ENTER.
The entered name is registered.
7 To create index names for other preset stations and functions, repeat steps 1 to 6.